Marguerite Lalie May 28, 2021 Chair
When purchasing your last office chair you probably were given the option of which type of casters(wheels) you wanted to have included on your chair. Generally there are not too many wheel option, usually the most common are standard carpet casters or an option to upgrade to soft casters that are more gentle on hardwood floors. Usually carpet, no matter which casters your chair comes with, provides too much resistance for office chairs rollers to work well. On carpet, often it is difficult to roll from one place to another because of the amount of pressure being put on the wheels from a person sitting on the chair, in addition to an already resistant surface. Rolling a chair over carpet will also wear down carpet fibers over time; you may find the spots on your carpet where your chair typically rolls over becoming more bare and noticeably different. Chairs also sometimes tend to leave indentations in carpet if used in the same spot that are near impossible to get rid of.
Once you have determined where you will be spending most of your time sitting and ergonomic accessories that may also play a part in the height adjustment of your chair, you will want to locate where the button or lever is on your chair that controls the height. On most chair models, it is generally located on the right hand side of the chair right below the seat. Some higher end chairs may even have pictures on their levers explaining what each lever on the chair does. All chair models will vary, and you will need to take the time to understand what each button does in order to fully adjust your chair to meet your needs.
After you fully understand how to adjust your chair, place the chair in front of the work area in which you will be using it most often. If your chair can be adjusted pneumatically simply apply a little pressure and push down on the seat while pulling the lever up to have the chair go down in height. To have the chair go up, apply a little pressure to the bottom of the seat and pull up with one hand while simultaneously pulling the lever up with the other. Computer chairs that do not have a pneumatic lift can be adjusted by loosening the height adjustment bolt by hand and pulling up or pushing down on the seat until the desired height is reached. Once you are happy with the height of the chair you will then need to tighten the bolt back to its original place.
When determining the correct height to have your office chair at, first make sure to place it in front of the desk or work area you will be spending most of your time at. If you have a keyboard tray installed underneath your desk, you will also need to take that into consideration when deciding the correct height your office chair should be at. Keep in mind that you will want to have a good amount of clearance between your keyboard tray or desk and your thighs to enable you to work more comfortably. If your computer chair comes with arms you will also want to take that into consideration as well especially if they are not height adjustable.
One of the key advantages of owning a leather office chair over a chair with a fabric material is the ease of maintenance. Leather upholstery is generally easy to maintain and can be cleaned simply by wiping the chair with a clean damp cloth. Applying a special leather cleaner every six months or so also maintains the overall appearance of the chair. If carefully maintained, a good quality hide upholstered chair will develop its own patina to give your chair a distinctive appearance as it matures and ages.
There are many different styles of office chairs available both online and in retail stores, however most modern or new models are designed to be adjusted pneumatically. Chairs that feature a pneumatic height adjustment can simply be adjusted by pushing or pulling either a button or lever located right below the seat. With a little bit of pressure exerted by you while pushing or pulling the button or lever below the seat, you may easily have the chair‘s height go down. If you get off your chair and pull or push that same button or lever you can just as easily have the chair‘s height go up.
Tag CloudModern Reading Chair